Zum Hauptinhalt wechseln

Nintendo DSi XL Power Board Replacement

Was du brauchst

  1. Nintendo DSi XL Power Board Replacement, Battery: Schritt 1, Bild 1 von 2 Nintendo DSi XL Power Board Replacement, Battery: Schritt 1, Bild 2 von 2
    • Remove the two Phillips screws securing the battery cover to the back of the handheld console.

    • Lift the battery cover off the back of the DSi XL.

  2. Nintendo DSi XL Power Board Replacement: Schritt 2, Bild 1 von 1
    • Lift the battery from the DSi XL.

  3. Nintendo DSi XL Power Board Replacement, Lower Case: Schritt 3, Bild 1 von 3 Nintendo DSi XL Power Board Replacement, Lower Case: Schritt 3, Bild 2 von 3 Nintendo DSi XL Power Board Replacement, Lower Case: Schritt 3, Bild 3 von 3
    • Remove the four rubber screw covers on the lower case by prying them up with a push pin.

  4. Nintendo DSi XL Power Board Replacement: Schritt 4, Bild 1 von 1
    • Remove the following seven Phillips screws that secure the lower case to the rest of the DSi XL:

    • Four silver 5.3 mm screws

    • Two black 5.3 mm screws

    • One black 2.5 mm screw

  5. Nintendo DSi XL Power Board Replacement: Schritt 5, Bild 1 von 3 Nintendo DSi XL Power Board Replacement: Schritt 5, Bild 2 von 3 Nintendo DSi XL Power Board Replacement: Schritt 5, Bild 3 von 3
    • Turn the DSi XL over, and open the display.

    • Insert a spudger between the upper and lower case at the bottom left corner of the DSi.

    • Slide the spudger along the bottom edge of the upper case to release the latches securing the upper case to the lower case.

  6. Nintendo DSi XL Power Board Replacement: Schritt 6, Bild 1 von 2 Nintendo DSi XL Power Board Replacement: Schritt 6, Bild 2 von 2
    • Close the display and turn the DSi XL over.

    • Lift the lower case from the front edge.

    • Rotate the lower case away from the DSi.

    • The lower case cannot be completely removed yet, since it is still connected to the motherboard.

  7. Nintendo DSi XL Power Board Replacement: Schritt 7, Bild 1 von 2 Nintendo DSi XL Power Board Replacement: Schritt 7, Bild 2 von 2
    • Using a spudger, pry the SD card/right shoulder button connector off its socket.

    • Pry the volume button/left shoulder button connector off its socket on the motherboard with a spudger.

  8. Nintendo DSi XL Power Board Replacement, Power Board: Schritt 8, Bild 1 von 2 Nintendo DSi XL Power Board Replacement, Power Board: Schritt 8, Bild 2 von 2
    • Using the flat end of a spudger, flip up the retaining flap on the ZIF connector for the D-pad/power button cable.

    • With the pointed end of the spudger, pull the D-pad/power button cable from its connector on the motherboard.

  9. Nintendo DSi XL Power Board Replacement: Schritt 9, Bild 1 von 1
    • Using the flat end of the spudger, carefully pry the battery cable out of its socket on the motherboard.

    • Use caution, as the wires are very fragile and could come out of the connector if pulled on too hard.

  10. Nintendo DSi XL Power Board Replacement: Schritt 10, Bild 1 von 2 Nintendo DSi XL Power Board Replacement: Schritt 10, Bild 2 von 2
    • Remove the seven 2.5 mm silver screws securing the power board to the upper case.

    • Lift the power board off the upper case.

Abschluss

To reassemble your device, follow these instructions in reverse order.

6 weitere Nutzer:innen haben diese Anleitung absolviert.

Brett Hartt

Mitglied seit: 04/12/10

127.749 Reputation

143 Anleitungen geschrieben

Team

iFixit Mitglied von iFixit

Staff

136 Mitglieder

16.560 Anleitungen geschrieben

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 2

Letzte 7 Tage: 11

Letzte 30 Tage: 69

Insgesamt: 16,958