Zum Hauptinhalt wechseln

Gateway MD2614u Fan Replacement

Was du brauchst

  1. Gateway MD2614u Fan Replacement, Back Cover: Schritt 1, Bild 1 von 1
    • Place the laptop so the back cover is facing up.

  2. Gateway MD2614u Fan Replacement: Schritt 2, Bild 1 von 1
    • Remove the 8 screws from the back cover using the Phillips #00 screwdriver.

  3. Gateway MD2614u Fan Replacement: Schritt 3, Bild 1 von 1
    • Lift off the cover.

  4. Gateway MD2614u Fan Replacement, Fan: Schritt 4, Bild 1 von 1
    • Unplug the fan’s power cable, which is a group of black wires attached to a white plastic head on the motherboard.

    • Pull the plastic part of the cable, not the wires, so that the plug does not break.

  5. Gateway MD2614u Fan Replacement: Schritt 5, Bild 1 von 1
    • Remove the two screws located on opposite sides of the fan with a Phillips #00 screw driver.

  6. Gateway MD2614u Fan Replacement: Schritt 6, Bild 1 von 1
    • The fan is permanently attached to the silver heat sink next to the RAM.

    • To completely remove the parts, loosen the heat sink’s four screws with a Phillips #00 screw driver.

    • Take out the screws in the numerical order shown on the heat sink.

  7. Gateway MD2614u Fan Replacement: Schritt 7, Bild 1 von 1
    • Pull the fan and heat sink toward you at a 20 degree angle upward.

Abschluss

To reassemble your device, follow these instructions in reverse order.

2 weitere Nutzer:innen haben diese Anleitung absolviert.

Toni Pipes

Mitglied seit: 10/05/10

333 Reputation

7 Anleitungen geschrieben

Team

Cal Poly, Team 21-31, Regan Fall 2010 Mitglied von Cal Poly, Team 21-31, Regan Fall 2010

CPSU-REGAN-F10S21G31

4 Mitglieder

14 Anleitungen geschrieben

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 2

Insgesamt: 4,899