Zum Hauptinhalt wechseln

Disassembling IBM ThinkPad A30 Upper Case

Was du brauchst

  1. Disassembling IBM ThinkPad A30 Upper Case, Battery: Schritt 1, Bild 1 von 2 Disassembling IBM ThinkPad A30 Upper Case, Battery: Schritt 1, Bild 2 von 2
    • Flip the ThinkPad over so that it is upside down.

    • Slide the highlighted tab to the left.

    • With your finger on the tab, remove the battery by lifting it upwards away from the laptop.

  2. Disassembling IBM ThinkPad A30 Upper Case, Hard Drive: Schritt 2, Bild 1 von 3 Disassembling IBM ThinkPad A30 Upper Case, Hard Drive: Schritt 2, Bild 2 von 3 Disassembling IBM ThinkPad A30 Upper Case, Hard Drive: Schritt 2, Bild 3 von 3
    • Remove the highlighted screw with a Phillips #1 screwdriver.

    • Pull the hard drive out.

  3. Disassembling IBM ThinkPad A30 Upper Case, Upper Case: Schritt 3, Bild 1 von 1
    • Make sure the laptop is upside down and oriented in the direction shown.

    • Remove the six 16.7mm screws inside the circled holes.

  4. Disassembling IBM ThinkPad A30 Upper Case: Schritt 4, Bild 1 von 1
    • Rotate the ThinkPad so that the hard drive bay is facing you.

    • Remove the black cover to reveal a 14.8mm screw.

    • Remove the uncovered screw with a Phillips #0 screwdriver.

  5. Disassembling IBM ThinkPad A30 Upper Case: Schritt 5, Bild 1 von 2 Disassembling IBM ThinkPad A30 Upper Case: Schritt 5, Bild 2 von 2
    • Flip the ThinkPad over and open the LCD panel.

    • Pry apart the keyboard with a plastic opening tool or with your fingers.

  6. Disassembling IBM ThinkPad A30 Upper Case: Schritt 6, Bild 1 von 3 Disassembling IBM ThinkPad A30 Upper Case: Schritt 6, Bild 2 von 3 Disassembling IBM ThinkPad A30 Upper Case: Schritt 6, Bild 3 von 3
    • Be careful not to pull out the keyboard carelessly; there is a connector underneath it!

    • Lift the front end of the keyboard as shown.

    • Using your fingers, remove the black film cover.

  7. Disassembling IBM ThinkPad A30 Upper Case: Schritt 7, Bild 1 von 3 Disassembling IBM ThinkPad A30 Upper Case: Schritt 7, Bild 2 von 3 Disassembling IBM ThinkPad A30 Upper Case: Schritt 7, Bild 3 von 3
    • Locate the connector attached to the motherboard.

    • Disconnect the ribbon cable by removing the connector.

  8. Disassembling IBM ThinkPad A30 Upper Case: Schritt 8, Bild 1 von 2 Disassembling IBM ThinkPad A30 Upper Case: Schritt 8, Bild 2 von 2
    • Lift and remove the keyboard.

    • Remove the two 5.6mm screws.

    • Remove the 16.7mm screw.

  9. Disassembling IBM ThinkPad A30 Upper Case: Schritt 9, Bild 1 von 3 Disassembling IBM ThinkPad A30 Upper Case: Schritt 9, Bild 2 von 3 Disassembling IBM ThinkPad A30 Upper Case: Schritt 9, Bild 3 von 3
    • You will need to use a little force. Be wary of the tabs.

    • Pry off the upper case with your hands.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Ein:e weitere:r Nutzer:in hat diese Anleitung absolviert.

Alan

Mitglied seit: 10/07/10

380 Reputation

6 Anleitungen geschrieben

Team

Cal Poly, Team 4-44, Amido Fall 2010 Mitglied von Cal Poly, Team 4-44, Amido Fall 2010

CPSU-AMIDO-F10S4G44

4 Mitglieder

26 Anleitungen geschrieben

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 4

Insgesamt: 2,120