Zum Hauptinhalt wechseln

Adjust Goose-neck (adjustable quill stem) on Specialized Expedition

Was du brauchst

  1. Adjust Goose-neck (adjustable quill stem) on Specialized Expedition, Adjust Goose-neck (adjustable quill stem) on Specialized Expedition: Schritt 1, Bild 1 von 2 Adjust Goose-neck (adjustable quill stem) on Specialized Expedition, Adjust Goose-neck (adjustable quill stem) on Specialized Expedition: Schritt 1, Bild 2 von 2
    • Remove the bolt cover with a flathead screwdriver.

  2. Adjust Goose-neck (adjustable quill stem) on Specialized Expedition: Schritt 2, Bild 1 von 3 Adjust Goose-neck (adjustable quill stem) on Specialized Expedition: Schritt 2, Bild 2 von 3 Adjust Goose-neck (adjustable quill stem) on Specialized Expedition: Schritt 2, Bild 3 von 3
    • Loosen the goose-neck (adjustable quill stem) with a 6 mm Allen wrench.

    • After loosening the goose-neck (adjustable quill stem), it still may be stiff. Hold the wheel from turning and twist the handlebars from side to side.

    • If quill stem is still stuck then place 6 mm Allen wrench firmly into bolt and tap with a mallet.

    • Position the handlebars to your preferred height. Make sure not to pull cable and housing to tight. I could adversely effect shifting and braking performance.

    • Make sure you don't raise quill stem above minimum insert line.

  3. Adjust Goose-neck (adjustable quill stem) on Specialized Expedition: Schritt 3, Bild 1 von 3 Adjust Goose-neck (adjustable quill stem) on Specialized Expedition: Schritt 3, Bild 2 von 3 Adjust Goose-neck (adjustable quill stem) on Specialized Expedition: Schritt 3, Bild 3 von 3
    • Align the direction of the goose-neck (adjustable quill stem) with the front tire.

    • Firmly tighten the goose-neck (adjustable quill stem) bolt using a 6 mm Allen wrench.

    • Pop the bolt cover back on.

    • If calling a bicycle repair shop, refer to it as a adjustable quill stem (technical term) instead of goose-neck as mechanic may not know what you are talking about.

Ziellinie

Ein:e weitere:r Nutzer:in hat diese Anleitung absolviert.

aaron thielk

Mitglied seit: 10/10/10

1.882 Reputation

5 Anleitungen geschrieben

Team

Cal Poly, Team 5-13, Maness Fall 2010 Mitglied von Cal Poly, Team 5-13, Maness Fall 2010

CPSU-MANESS-F10S5G13

4 Mitglieder

17 Anleitungen geschrieben

Ein Kommentar

Anyone know where/how to buy a replacement bolt cover?

Bennett Hart - Antwort

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 2

Letzte 30 Tage: 11

Insgesamt: 9,211