Zum Hauptinhalt wechseln

Apple Thunderbolt Display LCD tauschen

Was du brauchst

  1. Apple Thunderbolt Display LCD tauschen, LCD: Schritt 1, Bild 1 von 3 Apple Thunderbolt Display LCD tauschen, LCD: Schritt 1, Bild 2 von 3 Apple Thunderbolt Display LCD tauschen, LCD: Schritt 1, Bild 3 von 3
    • Lege das Display mit der Bildschirmseite nach oben ab.

    • Der Standfuß ist beweglich. Deswegen ist es gut, wenn du das Display mit einem Hartschaumblock gegen den Fuß abstützt.

    • Bringe die Saugheber auf beiden Seiten oben fest am Bildschirm an.

    • Die Glasscheibe ist am restlichen Bildschirm mit kleinen Magneten befestigt. Hebe langsam an, bis sie sich ablöst.

  2. Apple Thunderbolt Display LCD tauschen: Schritt 2, Bild 1 von 2 Apple Thunderbolt Display LCD tauschen: Schritt 2, Bild 2 von 2
    • Drehe zwölf Torx TR10 Schrauben an der Oberkante und den Seitenkanten heraus.

  3. Apple Thunderbolt Display LCD tauschen: Schritt 3, Bild 1 von 2 Apple Thunderbolt Display LCD tauschen: Schritt 3, Bild 2 von 2
    • Hebe das Display langsam aus seinem Sitz heraus und kippe es hoch.

    • Es ist sehr hilfreich, wenn dich zwei weitere Hände unterstützen und das LCD festhalten, während du an den Kabeln darunter arbeitest.

    • Das LCD ist mit vier Kabeln an den restlichen Bauteilen angeschlossen. Achte darauf, dass du nicht zu fest an ihnen ziehst und sie beschädigst.

  4. Apple Thunderbolt Display LCD tauschen: Schritt 4, Bild 1 von 3 Apple Thunderbolt Display LCD tauschen: Schritt 4, Bild 2 von 3 Apple Thunderbolt Display LCD tauschen: Schritt 4, Bild 3 von 3
    • Fasse den Stecker des ersten Kabels (das, was am weitesten von dem mit Schrauben befestigten entfernt ist) an und ziehe ihn langsam heraus.

  5. Apple Thunderbolt Display LCD tauschen: Schritt 5, Bild 1 von 3 Apple Thunderbolt Display LCD tauschen: Schritt 5, Bild 2 von 3 Apple Thunderbolt Display LCD tauschen: Schritt 5, Bild 3 von 3
    • Um an den Stecker vom nächsten Kabel, direkt neben dem eben gelösten, zu gelangen, musst du erst an einem Stück Klebeband an einer Metallleiste ziehen.

    • Benutze das Klebeband als Griff und klappe die Metallleiste herum.

    • Fasse dann den Stecker und ziehe ihn langsam aus dem Anschluss auf dem Logic Board ab.

  6. Apple Thunderbolt Display LCD tauschen: Schritt 6, Bild 1 von 3 Apple Thunderbolt Display LCD tauschen: Schritt 6, Bild 2 von 3 Apple Thunderbolt Display LCD tauschen: Schritt 6, Bild 3 von 3
    • Fasse behutsam den Stecker auf der anderen Seite des Logic Boards unten an und ziehe ihn vom Board ab.

  7. Apple Thunderbolt Display LCD tauschen: Schritt 7, Bild 1 von 1
    • Das letzte Kabel des LCDs ist mit einer Torx T 10 Schraube gesichert. Drehe sie heraus.

  8. Apple Thunderbolt Display LCD tauschen: Schritt 8, Bild 1 von 2 Apple Thunderbolt Display LCD tauschen: Schritt 8, Bild 2 von 2
    • Jetzt ist das LCD komplett vom Gehäuse abgetrennt. Du kannst es herausnehmen.

    • Lege das LCD am Besten auf ein Bett oder ein dickes Tuch um Schäden am LCD zu verhindern.

Abschluss

Um dein Gerät wieder zusammenbauen, folge den Schritten in umgekehrter Reihenfolge.

28 weitere Nutzer:innen haben diese Anleitung absolviert.

Besonderer Dank geht an diese Übersetzer:innen:

en de

100%

Diese Übersetzer:innen helfen uns, die Welt zu reparieren! Wie kann ich mithelfen?
Hier starten ›

Calvin Laverty

Mitglied seit: 04/14/15

2.240 Reputation

4 Anleitungen geschrieben

Team

Cal Poly, Team 5-11, Maness Spring 2015 Mitglied von Cal Poly, Team 5-11, Maness Spring 2015

CPSU-MANESS-S15S5G11

4 Mitglieder

19 Anleitungen geschrieben

11 Kommentare

Now I just need to find the affordable replacement LCD Panel. Mine is not too bad - but it has recently developed a streak on one side that is very irksome.

gigabob - Antwort

Love your site! Proved very helpful on multiple occasions and your products are fantastic!

Forgive my ignorance...

Is it possible to (1) Are any of the components of Thunderbolt Display upgrade-able? .... (2) There appears to be plenty of real-estate, can a Thunderbolt Display be turned into mac and/or pc? ... (3) Any way to upgrade to USB 3.0/3.1?...

I like tinkering with electronics and don't mind the complexities or if necessary getting parts, just wondering if any of these are possible and if so, can you give a clue as to where I can find more info... Thank You.

Mark Karasin - Antwort

Would like to see a continuation of what it takes to replace the Thunderbolt cable that is attached to the back of the display

Michael Martin - Antwort

Hi Michael

What happen to your monitor for you to need to replace the cable. It could be solution as to why my monitor has a black screen.

Any help?

Thanks

Fm34b - Antwort

Does the LCD from an iMac 2009 27” fit into the Thunderbolt Display and make it work?

Aldo B - Antwort

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 5

Letzte 7 Tage: 40

Letzte 30 Tage: 249

Insgesamt: 30,939