Zum Hauptinhalt wechseln

Nexus 9 Antenna Board Replacement

Was du brauchst

  1. Nexus 9 Antenna Board Replacement, Rear Case: Schritt 1, Bild 1 von 3 Nexus 9 Antenna Board Replacement, Rear Case: Schritt 1, Bild 2 von 3 Nexus 9 Antenna Board Replacement, Rear Case: Schritt 1, Bild 3 von 3
    • With your fingers, carefully pry off the back plastic casing. Starting at the corners is usually the easiest.

    • The rear-facing camera seems to fit a little too snugly in its compartment on the rear case; so make sure that it stays connected to the motherboard.

  2. Nexus 9 Antenna Board Replacement, Antenna Board: Schritt 2, Bild 1 von 2 Nexus 9 Antenna Board Replacement, Antenna Board: Schritt 2, Bild 2 von 2
    • This step is not necessary if you have already removed the battery.

    • Carefully peel up the copper shielding with your fingers.

    • Before fully removing the copper shielding, make sure that the blue antenna cable is out of the way of the copper tab.

  3. Nexus 9 Antenna Board Replacement: Schritt 3, Bild 1 von 1
    • Unscrew the three 3 mm Torx T5 screws on the antenna board.

    • This step and the next show the battery removed, but it is not necessary to remove it if you are only replacing the antenna board.

  4. Nexus 9 Antenna Board Replacement: Schritt 4, Bild 1 von 1
    • Use your fingers or a pair of tweezers to disconnect the blue antenna cable from the motherboard.

    • When reinstalling the antenna, be sure to clean it with a degreaser such as windex or isopropyl alcohol. The oils on your fingers have the potential to create wireless interference.

    • The antenna board should now lift free of the motherboard.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Geoff Wacker

Mitglied seit: 09/30/13

89.846 Reputation

89 Anleitungen geschrieben

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 0

Insgesamt: 1,387