Einleitung
This guide is to remove the headlamp. Left and right remove identical. This will have to be done to either change a light bulb or to remove the complete headlamp for exchange.
Was du brauchst
-
-
Here is the Jeep GC. Removal of the headlamp is identical for both sides.
-
By opening the hood and looking straight down on the headlamp assembly, the 6mm hex head jack screw can be seen.
-
Use a 6mm socket and nut driver to remove the jack screw. 1/4 socket will not fit 9/32 does, but it is a bit sloppy
-
-
-
-
Remove the long jack screw.
-
Grasp upper inboard and lower outboard corners of headlamp and forcefully pull headlamp outward.
-
Remove all bulb sockets from headlamp module. Separate headlamp from vehicle.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Rückgängig: Ich habe diese Anleitung nicht absolviert.
6 weitere Nutzer:innen haben diese Anleitung absolviert.
Team
4 Kommentare
It’s a 7mm socket
Not on mine. Just rechecked and it is a 6mm on my Jeep
Thankful for simple instructions without any extra info or words ?
I’m removing it to replace fan cooling module. I heard I can cut through to get to it without disassembling the grill bumper etc
