Zum Hauptinhalt wechseln

LG G Pad 8.3 Back Panel Replacement

Grundständige Anleitung
Dies ist eine grundständige Anleitung, die nur als Teil einer anderen Anleitung verwendet werden sollte.

Was du brauchst

  1. LG G Pad 8.3 Back Panel Replacement, Back Panel: Schritt 1, Bild 1 von 2 LG G Pad 8.3 Back Panel Replacement, Back Panel: Schritt 1, Bild 2 von 2
    • With the tablet face down, pull the SD card slot cover out.

    • Using a Phillips #000 screwdriver, remove the 3mm screw located in the SD card slot.

  2. LG G Pad 8.3 Back Panel Replacement: Schritt 2, Bild 1 von 3 LG G Pad 8.3 Back Panel Replacement: Schritt 2, Bild 2 von 3 LG G Pad 8.3 Back Panel Replacement: Schritt 2, Bild 3 von 3
    • Insert a plastic opening tool in the small crevasse between the screen and the back panel.

    • Pry the screen away from the back panel.

    • Repeat this on each edge of the device.

    • We found it helpful to leave multiple plastic opening tools wedged in the crevasse to prevent it from closing.

    • This requires heavy force. The back of the device is attached with an adhesive. If the back panel is too hard to remove, use the iOpener.

  3. LG G Pad 8.3 Back Panel Replacement: Schritt 3, Bild 1 von 2 LG G Pad 8.3 Back Panel Replacement: Schritt 3, Bild 2 von 2
    • After using the plastic opening tools, pry the device open with your hands.

    • Remove the back panel from the screen.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Team

CSU Fullerton, Team 1-6, Bruce Fall 2015 Mitglied von CSU Fullerton, Team 1-6, Bruce Fall 2015

CSUF-BRUCE-F15S1G6

4 Mitglieder

14 Anleitungen geschrieben

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 0

Insgesamt: 124