Repariere deine Sachen Community Store

Apple Powerbook 5300 Keyboard Replacement

Einleitung

Removal of the keyboard requires little technical skill, and only the removal of three screws.

Was du brauchst

  1. Apple Powerbook 5300 Keyboard Replacement, Battery: Schritt 1, Bild 1 von 1

    • Position the Powerbook towards you with the monitor closed.

    • Press the battery removal latch located on the right side of the front panel.

    • Gently slide the battery out.

    • The keyboard, front pane, and hard drive are connected to the laptop's logic board via a ribbon cable. Lift up slowly on each component with one hand and disconnect the ribbons from their ports on the logic board.

    Übersetzen

  3. Apple Powerbook 5300 Keyboard Replacement, Keyboard: Schritt 2, Bild 1 von 1

    • Turn the laptop over and remove the three T8 torx screws from the bottom panel.

    Übersetzen

  4. Apple Powerbook 5300 Keyboard Replacement: Schritt 3, Bild 1 von 1

    • Turn the laptop back over and open the monitor.

    • With the monitor facing towards you, gently pull up on the keyboard panel from the bottom.

    • With the keyboard turned over as pictured, carefully remove its ribbon cable from the connection port on the logic board. Use a spudger to lift the white plastic retainer about 1/16" to release the cable.

    Übersetzen
Abschluss

To reassemble your device, follow these instructions in reverse order.

Ein:e weitere:r Nutzer:in hat diese Anleitung absolviert.

Autor:in

mit 20 anderen Mitwirkenden

Scott

Mitglied seit: 04/26/11

155 Reputation

5 Anleitungen geschrieben

Auszeichnungen: 7

+ 4 weitere Auszeichnungen

Team

Cal Poly, Team 25-30, Garner Spring 2011 Mitglied von Cal Poly, Team 25-30, Garner Spring 2011

CPSU-GARNER-S11S25G30

4 Mitglieder

6 Anleitungen geschrieben

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 1

Letzte 7 Tage: 1

Letzte 30 Tage: 1

Insgesamt: 2,544