Zum Hauptinhalt wechseln

HP Pavilion zd8000 Top Cover Replacement

Was du brauchst

  1. HP Pavilion zd8000 Top Cover Replacement, Battery: Schritt 1, Bild 1 von 1
    • Slide the battery release latch towards you.

  2. HP Pavilion zd8000 Top Cover Replacement: Schritt 2, Bild 1 von 2 HP Pavilion zd8000 Top Cover Replacement: Schritt 2, Bild 2 von 2
    • Pull up on the battery to remove it.

  3. HP Pavilion zd8000 Top Cover Replacement, RAM: Schritt 3, Bild 1 von 2 HP Pavilion zd8000 Top Cover Replacement, RAM: Schritt 3, Bild 2 von 2
    • Loosen the Phillips screw labeled ‘ram’ and lift the cover.

  4. HP Pavilion zd8000 Top Cover Replacement: Schritt 4, Bild 1 von 2 HP Pavilion zd8000 Top Cover Replacement: Schritt 4, Bild 2 von 2
    • Locate the green RAM card and find the metal tabs securing the card.

    • Push outwards on the two tabs to release the card.

  5. HP Pavilion zd8000 Top Cover Replacement: Schritt 5, Bild 1 von 1
    • Carefully slide the card out at an upward angle away from the slot.

  6. HP Pavilion zd8000 Top Cover Replacement, WiFi Card Cables: Schritt 6, Bild 1 von 2 HP Pavilion zd8000 Top Cover Replacement, WiFi Card Cables: Schritt 6, Bild 2 von 2
    • Unscrew the four 8mm Philips screws marked with an icon resembling a stacks of discs.

    • Lift the cover from the right to remove it.

  7. HP Pavilion zd8000 Top Cover Replacement: Schritt 7, Bild 1 von 2 HP Pavilion zd8000 Top Cover Replacement: Schritt 7, Bild 2 von 2
    • Use tweezers to detach the grey and black cables connected to the green WiFi card.

  8. HP Pavilion zd8000 Top Cover Replacement, CD/Optical Drive: Schritt 8, Bild 1 von 1
    • Remove the 8mm Philips screw located between the hard drive and the WiFi card.

  9. HP Pavilion zd8000 Top Cover Replacement: Schritt 9, Bild 1 von 2 HP Pavilion zd8000 Top Cover Replacement: Schritt 9, Bild 2 von 2
    • Turn the laptop 90 degrees clockwise so you are facing the CD drive.

    • Unbend a paperclip and insert the end into the small hole by the eject button to cause the tray to pop out towards you.

  10. HP Pavilion zd8000 Top Cover Replacement: Schritt 10, Bild 1 von 2 HP Pavilion zd8000 Top Cover Replacement: Schritt 10, Bild 2 von 2
    • Gently pull the tray away from the laptop and the rest of the optical drive will follow.

  11. HP Pavilion zd8000 Top Cover Replacement, Keyboard: Schritt 11, Bild 1 von 1
    • Remove the two 8mm Philips screws marked “K” on the bottom of the laptop.

  12. HP Pavilion zd8000 Top Cover Replacement: Schritt 12, Bild 1 von 2 HP Pavilion zd8000 Top Cover Replacement: Schritt 12, Bild 2 von 2
    • Flip the laptop over and open the screen.

    • Push up on the four latches located at the top of the keyboard with the spudger to release them.

  13. HP Pavilion zd8000 Top Cover Replacement: Schritt 13, Bild 1 von 2 HP Pavilion zd8000 Top Cover Replacement: Schritt 13, Bild 2 von 2
    • Lift the keyboard carefully because it is attached to the motherboard by a ribbon cable.

    • Lift the top of the keyboard towards you. Then, while keeping the keyboard at an angle, lift it towards the display.

  14. HP Pavilion zd8000 Top Cover Replacement: Schritt 14, Bild 1 von 2 HP Pavilion zd8000 Top Cover Replacement: Schritt 14, Bild 2 von 2
    • Rotate the keyboard so that the bottom is visible.

    • With the keyboard lifted, locate the blue-striped tab on the underside of the black ribbon cable.

    • Pull the tab towards you to release the keyboard from the laptop.

  15. HP Pavilion zd8000 Top Cover Replacement, Switch Cover: Schritt 15, Bild 1 von 2 HP Pavilion zd8000 Top Cover Replacement, Switch Cover: Schritt 15, Bild 2 von 2
    • Place the laptop face-down and rotate it 180 degrees so the vents are facing you.

    • Remove the five 8mm Philips screws. Three are on the black base and two are near the hinges.

  16. HP Pavilion zd8000 Top Cover Replacement: Schritt 16, Bild 1 von 1
    • Flip the laptop over.

    • Fully open the laptop.

  17. HP Pavilion zd8000 Top Cover Replacement: Schritt 17, Bild 1 von 3 HP Pavilion zd8000 Top Cover Replacement: Schritt 17, Bild 2 von 3 HP Pavilion zd8000 Top Cover Replacement: Schritt 17, Bild 3 von 3
    • Rotate it so the display is on your right and the keyboard is on your left.

    • Lift the switch cover firmly but slowly so you do not snap it.

    • Lift the switch cover carefully from one end while sliding the spudger between the switch cover and the laptop to separate them.

    • The switch cover should easily separate from the laptop as you run the spudger through.

  18. HP Pavilion zd8000 Top Cover Replacement, Screen: Schritt 18, Bild 1 von 2 HP Pavilion zd8000 Top Cover Replacement, Screen: Schritt 18, Bild 2 von 2
    • Close the lid and rotate the laptop so that the vents are facing you.

    • Unscrew the two 8mm Philips screws below the hinges.

  19. HP Pavilion zd8000 Top Cover Replacement: Schritt 19, Bild 1 von 2 HP Pavilion zd8000 Top Cover Replacement: Schritt 19, Bild 2 von 2
    • Carefully rotate the laptop 90 degrees counter-clockwise and open the screen.

    • Pull on the black tab with the HP service sticker to unplug the display from the motherboard.

  20. HP Pavilion zd8000 Top Cover Replacement: Schritt 20, Bild 1 von 2 HP Pavilion zd8000 Top Cover Replacement: Schritt 20, Bild 2 von 2
    • Using tweezers, remove the black cable from the hole leading to the WiFi enclosure.

    • Pull gently to remove the black and grey cables from the case.

    • Check the surface beneath the laptop to ensure the cables do not catch on anything when you flip the laptop over.

  21. HP Pavilion zd8000 Top Cover Replacement: Schritt 21, Bild 1 von 2 HP Pavilion zd8000 Top Cover Replacement: Schritt 21, Bild 2 von 2
    • Using tweezers, pull the black cable towards the display and through the hole in the casing.

  22. HP Pavilion zd8000 Top Cover Replacement: Schritt 22, Bild 1 von 3 HP Pavilion zd8000 Top Cover Replacement: Schritt 22, Bild 2 von 3 HP Pavilion zd8000 Top Cover Replacement: Schritt 22, Bild 3 von 3
    • Unscrew the two 8mm Philips screws that attach the hinge to the laptop's display.

    • Lift the screen upwards to detach it from the laptop.

  23. HP Pavilion zd8000 Top Cover Replacement, Top Cover: Schritt 23, Bild 1 von 2 HP Pavilion zd8000 Top Cover Replacement, Top Cover: Schritt 23, Bild 2 von 2
    • With the laptop face-down, remove the eleven 8mm Philips screws.

  24. HP Pavilion zd8000 Top Cover Replacement: Schritt 24, Bild 1 von 2 HP Pavilion zd8000 Top Cover Replacement: Schritt 24, Bild 2 von 2
    • Rotate the laptop 180 degrees so the vents are facing you.

    • Unscrew the four 3mm Philips screws below the vents.

  25. HP Pavilion zd8000 Top Cover Replacement: Schritt 25, Bild 1 von 2 HP Pavilion zd8000 Top Cover Replacement: Schritt 25, Bild 2 von 2
    • Rotate the laptop 90 degrees counter-clockwise.

    • Unscrew the two 3mm Philips screws from the optical drive bay.

  26. HP Pavilion zd8000 Top Cover Replacement: Schritt 26, Bild 1 von 3 HP Pavilion zd8000 Top Cover Replacement: Schritt 26, Bild 2 von 3 HP Pavilion zd8000 Top Cover Replacement: Schritt 26, Bild 3 von 3
    • Flip the laptop over so it is face-up with the trackpad closest to you.

    • Locate the ribbon cable directly above the track pad.

    • Find the black latch at the end of the ribbon cable and unlatch it with a spudger to release it.

  27. HP Pavilion zd8000 Top Cover Replacement: Schritt 27, Bild 1 von 3 HP Pavilion zd8000 Top Cover Replacement: Schritt 27, Bild 2 von 3 HP Pavilion zd8000 Top Cover Replacement: Schritt 27, Bild 3 von 3
    • Find the ribbon cable on the LED board located at the top of the laptop.

    • You will notice that the ribbon cable is connected to two levels - you will be dealing with the one on the lower level.

    • Find the black latch at the end of the ribbon cable and unlatch it with a spudger to release it.

  28. HP Pavilion zd8000 Top Cover Replacement: Schritt 28, Bild 1 von 2 HP Pavilion zd8000 Top Cover Replacement: Schritt 28, Bild 2 von 2
    • Locate the white connector attached to a red and black cable to the right of the LED board.

    • Using tweezers, pull the white connector away from you.

  29. HP Pavilion zd8000 Top Cover Replacement: Schritt 29, Bild 1 von 2 HP Pavilion zd8000 Top Cover Replacement: Schritt 29, Bild 2 von 2
    • Unscrew the four 8mm Philips screws from the top cover.

  30. HP Pavilion zd8000 Top Cover Replacement: Schritt 30, Bild 1 von 2 HP Pavilion zd8000 Top Cover Replacement: Schritt 30, Bild 2 von 2
    • Rotate the computer 90 degrees clockwise and insert the spudger at the seam above the card reader.

    • While lifting the front end of the top cover, slide the spudger across the seam.

    • When you have reached the firewire port, it should click open.

  31. HP Pavilion zd8000 Top Cover Replacement: Schritt 31, Bild 1 von 1
    • Lift the top cover from the left side to remove it completely.

Abschluss

To reassemble your device, follow these instructions in reverse order.

2 weitere Nutzer:innen haben diese Anleitung absolviert.

Allie Menard

Mitglied seit: 04/12/11

820 Reputation

13 Anleitungen geschrieben

Team

Cal Poly, Team 24-56, Amido Spring 2011 Mitglied von Cal Poly, Team 24-56, Amido Spring 2011

CPSU-AMIDO-S11S24G56

4 Mitglieder

13 Anleitungen geschrieben

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 1

Letzte 30 Tage: 2

Insgesamt: 3,219