Zum Hauptinhalt wechseln

iPhone 6s Pentalobe Schrauben ersetzen

Was du brauchst

  1. iPhone 6s Pentalobe Schrauben ersetzen, Pentalobe Schrauben: Schritt 1, Bild 1 von 1
    • Bevor du mit dem Ausbau beginnst, entlade den Akku auf unter 25%. Ein geladener Lithium-Ionen Akku kann Feuer fangen oder explodieren, wenn er aus Versehen beschädigt wird.

    • Schalte das iPhone aus, bevor du mit der Demontage beginnst.

    • Entferne die beiden 3,4 mm P2 Pentalobe Schrauben an der Unterseite des iPhones links und rechts vom Lightning-Anschluss.

Abschluss

Arbeite die Schritte in umgekehrter Reihenfolge ab, um dein Gerät wieder zusammenzubauen.

39 weitere Nutzer:innen haben diese Anleitung absolviert.

Besonderer Dank geht an diese Übersetzer:innen:

en de

100%

Diese Übersetzer:innen helfen uns, die Welt zu reparieren! Wie kann ich mithelfen?
Hier starten ›

Evan Noronha

Mitglied seit: 02/05/15

223.223 Reputation

168 Anleitungen geschrieben

2 Kommentare

I noticed both my pentalobe screws wouldn’t screw in last time. Upon checking the little components that the screws fix into were loose inside. Not a major drama but they also seem to hold the charger cable in place… or at least I’ve noticed cables are loose on my iPhone 6 since then. Is there a part I can buy to fix this issue, does anyone know please?

justingrisbrook - Antwort

I have an iPhone 6s plus, but I got a new phone recently so I put my 6s plus in my side table and went back to it a couple of weeks later just to see that the pentalobe screws are missing and the phone will no longer charge, I also realized that when I plug the charger in its a bit loose. There was also nothing wrong with the phone before it worked perfectly fine.

Simoneil Ming - Antwort

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 2

Letzte 7 Tage: 33

Letzte 30 Tage: 148

Insgesamt: 24,837