Zum Hauptinhalt wechseln

Was du brauchst

Dieser Teardown ist keine Reparaturanleitung. Um dein Speakal iPanda zu reparieren, verwende unsere Fehlerbehebungsseite.

  1. Speakal iPanda Teardown, Speakal iPanda Teardown: Schritt 1, Bild 1 von 1
    • The happy Panda

  2. Speakal iPanda Teardown: Schritt 2, Bild 1 von 3 Speakal iPanda Teardown: Schritt 2, Bild 2 von 3 Speakal iPanda Teardown: Schritt 2, Bild 3 von 3
    • Flip it to find the screws.

    • Unscrew the four Phillips #0 screws.

  3. Speakal iPanda Teardown: Schritt 3, Bild 1 von 2 Speakal iPanda Teardown: Schritt 3, Bild 2 von 2
    • Be careful with the cables of the subwoofer.

  4. Speakal iPanda Teardown: Schritt 4, Bild 1 von 2 Speakal iPanda Teardown: Schritt 4, Bild 2 von 2
    • He look like this on his insides.

    • there is a little lock on the sides.

    • Don't forget these screws too.

  5. Speakal iPanda Teardown: Schritt 5, Bild 1 von 2 Speakal iPanda Teardown: Schritt 5, Bild 2 von 2
    • Opening the sandwich.

    • Don't forget the cables!

  6. Speakal iPanda Teardown: Schritt 6, Bild 1 von 3 Speakal iPanda Teardown: Schritt 6, Bild 2 von 3 Speakal iPanda Teardown: Schritt 6, Bild 3 von 3
    • It doens't look like a panda anymore.

  7. Speakal iPanda Teardown: Schritt 7, Bild 1 von 1
    • Removing the board, it's all done.

  8. Speakal iPanda Teardown: Schritt 8, Bild 1 von 2 Speakal iPanda Teardown: Schritt 8, Bild 2 von 2
    • Poor panda...

paulostool

Mitglied seit: 06/06/11

121 Reputation

1 Anleitung geschrieben

3 Kommentare

Hi!

I have just wondered about tweeter type.

I have a pig, bud one of it's tweeters is dead.

Do you have any idea how to get a replacement tweeter?

THX!!

sonofhoegaarden - Antwort

Hello All,

Please can you assist me with sourcing a amplifier board for the Shox Panda as above in the panda tear down. My panda is supplying 12 Vots DC to the woofer. Thanks very much.

Peter Boucher - Antwort

Hi Peter, you may consider swapping the actual CD7377CZ Audio Amp for a ST Microelectronics TDA7375V, and probably the RM2576-5.0 voltage regulator with a Texas Instruments LM2576-5.0, both of which are drop-in replacement (as parts are chinese knock-offs).

Cheers !

grogcw - Antwort

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 1

Letzte 30 Tage: 10

Insgesamt: 5,044