Zum Hauptinhalt wechseln

JBL Clip 2 Audio AUX Cord Replacement

Was du brauchst

  1. JBL Clip 2 Audio AUX Cord Replacement, Audio AUX Cord: Schritt 1, Bild 1 von 1
    • Begin by removing the front cap of the JBL Clip 2 by using the blue plastic opening tool to get in between the creases.

    • If your JBL Clip 2 has never been opened this procedure will require moderate amount of force.

  2. JBL Clip 2 Audio AUX Cord Replacement: Schritt 2, Bild 1 von 1
    • There will be six 3 mm T8 screws under the cap, remove these six screws. Save

    • If you are not trying to replace the speaker please ignore the two middle 3 mm T8 screws during this procedure.

  3. JBL Clip 2 Audio AUX Cord Replacement: Schritt 3, Bild 1 von 1
    • The front cover will lift open easily and the components will be visible.

  4. JBL Clip 2 Audio AUX Cord Replacement: Schritt 4, Bild 1 von 1
    • To completely remove the top portion, disconnect the speaker from the motherboard using the blue plastic opening tool.

    • While disconnecting be sure to not use too much force as these two parts are meant to become disconnected.

  5. JBL Clip 2 Audio AUX Cord Replacement: Schritt 5, Bild 1 von 1
    • There will be four 3 mm T8 screws holding the motherboard in place, remove these four screws.

  6. JBL Clip 2 Audio AUX Cord Replacement: Schritt 6, Bild 1 von 1
Abschluss

To reassemble your device, follow these instructions in reverse order.

3 weitere Nutzer:innen haben diese Anleitung absolviert.

Michael Hong

Mitglied seit: 02/01/17

1.014 Reputation

5 Anleitungen geschrieben

Team

UW Tacoma, Team 2-2, Rose Winter 2017 Mitglied von UW Tacoma, Team 2-2, Rose Winter 2017

UWT-ROSE-W17S2G2

4 Mitglieder

7 Anleitungen geschrieben

Ein Kommentar

<a href="https://www.w3schools.com/">Visit W3Schools.com!</a>

pavan kalyan - Antwort

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 1

Letzte 7 Tage: 5

Letzte 30 Tage: 16

Insgesamt: 3,572