Einleitung
This guide details the steps to take off the button pad of your Inter-tel IP 8660.
Was du brauchst
-
-
Before disassembling the phone, make sure it is not plugged into power and the handset phone cord is disconnected from the handset jack.
-
-
-
Unscrew the 9 highlighted screws using a #1 Phillips head screwdriver. You can use a magnetized screwdriver to draw them out.
-
8 mm long
-
11 mm long
-
-
-
-
While holding down the motherboard, gently pull the wire harness connecting the speaker to the motherboard until it comes free.
-
-
-
Remove all plastic buttons. (Note: Look at the initial picture for locations of each button set)
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Rückgängig: Ich habe diese Anleitung nicht absolviert.
Ein:e weitere:r Nutzer:in hat diese Anleitung absolviert.
Team
Cal Poly, Team 11-24, Maness Winter 2012 Mitglied von Cal Poly, Team 11-24, Maness Winter 2012
CPSU-MANESS-W12S11G24
4 Mitglieder
14 Anleitungen geschrieben
