Einleitung
This repair guide visually maps out how to remove and replace the tweeters on a vintage Bose Series II speaker. Take caution when handling each component to ensure a successful repair.
Was du brauchst
-
-
Begin the repair by placing the Bose-301 speaker vertically.
-
Using two hands, pull the speaker grill towards you and away from the speaker body.
-
-
-
Lay the speaker body on its back.
-
Using the Philips Screwdriver, carefully remove the four #2x19mm screws that mount the main speaker to the speaker body.
-
-
-
-
Carefully place the speaker off to the side.
-
Then untwist the slack in the wires that are connected to the tweeters.
-
-
-
Using the socket wrench and the 1/4" socket, unscrew the 12.5 mm bolt that mounts the tweeter to the bracket.
-
-
-
While holding the tweeter, use your other hand to feed the wire through the hole at the bottom of the tweeter mount.
-
-
-
Remove the tweeter from the mount and locate the two wires that connect it to the speaker.
-
Using the pliers, untwist the wires that are attached to the two small rods at the bottom of the tweeter.
-
Repeat process for the second tweeter.
-
To reassemble your speaker, follow these instructions in reverse order.
To reassemble your speaker, follow these instructions in reverse order.
Rückgängig: Ich habe diese Anleitung nicht absolviert.
3 weitere Nutzer:innen haben diese Anleitung absolviert.
Team
USF Tampa, Team 15-3, Remmell Spring 2017 Mitglied von USF Tampa, Team 15-3, Remmell Spring 2017
USFT-REMMELL-S17S15G3
4 Mitglieder
1 Anleitung geschrieben
