Einleitung
This will show how to take apart the outer case of the device so repairs can be made.
Was du brauchst
-
-
First start by peeling off the outer rubbery covering on the bottom of the device.
-
-
-
After removing the rubber covering, unscrew the five 4.9mm Phillips screws in the holes of the plastic casing.
-
-
-
-
After unscrewing all five screws, remove the plastic casing. The back should now look like the picture shown.
-
-
-
The inner metal casing is latched inside the outer white plastic shell, so insert a pry tool underneath the metal casing and pry it apart from the shell.
-
It should make a click when it comes apart.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Rückgängig: Ich habe diese Anleitung nicht absolviert.
3 weitere Nutzer:innen haben diese Anleitung absolviert.