Englisch
Deutsch
3. Schritt
Remove the four 11mm T9-Torx screws on the underside of the display unit by rotating the screwdriver counter clockwise. Open the display unit to expose the circuit board by separating the back and front panels. Remove the ribbon cable by gently releasing the plastic locking mechanism and pulling the cable away from the circuit board.
  • Remove the four 11mm T9-Torx screws on the underside of the display unit by rotating the screwdriver counter clockwise.

  • Open the display unit to expose the circuit board by separating the back and front panels.

  • Remove the ribbon cable by gently releasing the plastic locking mechanism and pulling the cable away from the circuit board.

Hier Übersetzung einfügen

Hier Übersetzung einfügen

Hier Übersetzung einfügen

Deine Beiträge sind lizenziert unter der Open-Source Creative Commons Lizenz.