Englisch
Deutsch
2. Schritt
Remove all Phillips 7.5mm, 12.5mm, and 10.5mm screws holding the circuit board to the case. Make sure the device has been powered off and disconnected from the power source for at least a day before touching the electronic components.
  • Remove all Phillips 7.5mm, 12.5mm, and 10.5mm screws holding the circuit board to the case.

  • Make sure the device has been powered off and disconnected from the power source for at least a day before touching the electronic components.

Hier Übersetzung einfügen

Hier Übersetzung einfügen

Deine Beiträge sind lizenziert unter der Open-Source Creative Commons Lizenz.