Zum Hauptinhalt wechseln

Repariere deine Sachen

Recht auf Reparatur

Werkzeug & Ersatzteile

Hinweis: Du bearbeitest gerade die grundständige Anleitung, die du eben angeschaut hast. Alle Änderungen, die du vornimmst, betreffen alle 3 Anleitungen, die diesen Schritt beinhalten.

Englisch
Deutsch

Schritt 1 übersetzen

Schritt 1
Remove the power supply cable from its connector by pulling it parallel to the logic board. During reassembly of the logic board, pay attention to the position of the I/O connectors. When the board is back in the case, insert a USB or Thunderbolt cable into one of the connectors to align it perfectly.
  • Remove the power supply cable from its connector by pulling it parallel to the logic board.

  • During reassembly of the logic board, pay attention to the position of the I/O connectors. When the board is back in the case, insert a USB or Thunderbolt cable into one of the connectors to align it perfectly.

Löse den Verbinder der Stromversorgungskabels, indem du ihn parallel zur Oberfläche des Logic Board heraus ziehst.

[* black] Remove the power supply cable from its connector by pulling it parallel to the logic board.
[* icon_reminder] During reassembly of the logic board, pay attention to the position of the I/O connectors. When the board is back in the case, insert a USB or Thunderbolt cable into one of the connectors to align it perfectly.

Deine Beiträge sind lizenziert unter der Open-Source Creative Commons Lizenz.