Zum Hauptinhalt wechseln
Englisch
Deutsch

Schritt 1 übersetzen

Schritt 1
Remove the rubber capsule located on the upper left hand side above the fan. Remove the two 3.8mm screws located on the power management board with a PH1 Philips head screw driver. Remove the two 3.8mm screws located on the power management board with a PH1 Philips head screw driver.
  • Remove the rubber capsule located on the upper left hand side above the fan.

  • Remove the two 3.8mm screws located on the power management board with a PH1 Philips head screw driver.

Hier Übersetzung einfügen

Hier Übersetzung einfügen

Deine Beiträge sind lizenziert unter der Open-Source Creative Commons Lizenz.