Englisch
Deutsch
4. Schritt
Turn the vacuum head's bottom over so that the inside of the head is facing up. Using a Phillips #00 screwdriver, press down on metal bar of the roller on one side until it releases from the housing.
  • Turn the vacuum head's bottom over so that the inside of the head is facing up.

  • Using a Phillips #00 screwdriver, press down on metal bar of the roller on one side until it releases from the housing.

  • Turn the vacuum head's bottom over and pull at the roller and bar until they are completely out of the housing.

Hier Übersetzung einfügen

Hier Übersetzung einfügen

Hier Übersetzung einfügen

Deine Beiträge sind lizenziert unter der Open-Source Creative Commons Lizenz.