Zum Hauptinhalt wechseln

Repariere deine Sachen

Recht auf Reparatur

Werkzeug & Ersatzteile

Englisch
Deutsch
Schritt 3
To remove the light, start by  heating up a soldering utensil.  When it is hot, place the tip onto either one of the pin slots so soften the connection between the pin and the board.  Repeat this process on the other pinhole. To remove the light, start by  heating up a soldering utensil.  When it is hot, place the tip onto either one of the pin slots so soften the connection between the pin and the board.  Repeat this process on the other pinhole.
  • To remove the light, start by heating up a soldering utensil. When it is hot, place the tip onto either one of the pin slots so soften the connection between the pin and the board. Repeat this process on the other pinhole.

Hier Übersetzung einfügen

Deine Beiträge sind lizenziert unter der Open-Source Creative Commons Lizenz.