Zum Hauptinhalt wechseln
Englisch
Deutsch
2. Schritt
Once the four screws are removed, the top cover can be lifted off. There is a ribbon wire connecting the volume wheel to the circuit board. This is not permanently attached, and can be plugged back in if it gets pulled out.
  • Once the four screws are removed, the top cover can be lifted off.

  • There is a ribbon wire connecting the volume wheel to the circuit board. This is not permanently attached, and can be plugged back in if it gets pulled out.

  • Remove the three 2mm screws from the circuit board to separate it from the back plate.

Hier Übersetzung einfügen

Hier Übersetzung einfügen

Hier Übersetzung einfügen

Deine Beiträge sind lizenziert unter der Open-Source Creative Commons Lizenz.