Zum Hauptinhalt wechseln

Hinweis: Du bearbeitest eine grundständige Anleitung. Alle Änderungen, die du vornimmst, betreffen alle 17 Anleitungen, die diesen Schritt beinhalten.

Englisch
Chinesisch
2. Schritt
The following steps involve using an iOpener to soften the adhesive holding the front panel assembly in place. When using the iOpener, be sure to heat it in the microwave for no more than 30 seconds.
  • The following steps involve using an iOpener to soften the adhesive holding the front panel assembly in place. When using the iOpener, be sure to heat it in the microwave for no more than 30 seconds.

  • Handling it by the tabs on either end, place a heated iOpener over the top edge of the iPad.

  • Let the iOpener sit on the iPad for two minutes to soften the adhesive securing the front panel to the rest of the iPad.

接下来的几部将会需要用到iOpener来软化前面板下方的粘合剂。 当在微波炉中加热iOpener时切勿加热超过30秒。

抓住已经加热的iOpener的任意一端,将其放置在iPad的顶端。

将iOpener放置至少2分钟来软化面板下方的粘合剂。

Deine Beiträge sind lizenziert unter der Open-Source Creative Commons Lizenz.