Zum Hauptinhalt wechseln
Englisch
Deutsch
3. Schritt
We'll start with resistor R1 in your kit, which has yellow, purple, brown, and gold rings on it (more on what these colored rings mean later). Bend the leads of the resistor to 90o angles about 1.5 mm away from the body of the resistor. Bend the leads of the resistor to 90o angles about 1.5 mm away from the body of the resistor.
  • We'll start with resistor R1 in your kit, which has yellow, purple, brown, and gold rings on it (more on what these colored rings mean later).

  • Bend the leads of the resistor to 90o angles about 1.5 mm away from the body of the resistor.

Hier Übersetzung einfügen

Hier Übersetzung einfügen

Deine Beiträge sind lizenziert unter der Open-Source Creative Commons Lizenz.