Englisch
Deutsch
5. Schritt
Remove the spark plug cap from cylinder 1 by grabbing the plug cap boot and pulling straight out. Do not remove the cap by pulling on the wires, you risk ripping the wire out of the cap. Use a 5/8" spark plug driver, a socket extension and a socket wrench to remove the spark plug. Press the spark plug driver firmly onto the spark plug until you feel it "grab" the plug and turn it counter-clockwise until you can pull it out of the cylinder head.
Changing Spark Plug #1
  • Remove the spark plug cap from cylinder 1 by grabbing the plug cap boot and pulling straight out.

  • Do not remove the cap by pulling on the wires, you risk ripping the wire out of the cap.

  • Use a 5/8" spark plug driver, a socket extension and a socket wrench to remove the spark plug. Press the spark plug driver firmly onto the spark plug until you feel it "grab" the plug and turn it counter-clockwise until you can pull it out of the cylinder head.

  • Be careful not to drop anything down the spark plug hole and into the cylinder! If something falls into the cylinder you will have to do a complete cylinder tear down to remove what ever was dropped!

Hier Übersetzung einfügen

Hier Übersetzung einfügen

Hier Übersetzung einfügen

Hier Übersetzung einfügen

Deine Beiträge sind lizenziert unter der Open-Source Creative Commons Lizenz.