Zum Hauptinhalt wechseln
Englisch
Deutsch

Schritt 1 übersetzen

1. Schritt
Remove the two  Phillips #0, 2.0×5.0 mm hard drive access cover screws. Do not remove them fully. The screws will stay in place on the cover plate. Lift the access cover off and place it to the side out of your way. Lift the access cover off and place it to the side out of your way.
  • Remove the two Phillips #0, 2.0×5.0 mm hard drive access cover screws. Do not remove them fully. The screws will stay in place on the cover plate.

  • Lift the access cover off and place it to the side out of your way.

Hier Übersetzung einfügen

Hier Übersetzung einfügen

Deine Beiträge sind lizenziert unter der Open-Source Creative Commons Lizenz.