Englisch
Deutsch
14. Schritt
Secure the thermal sensor to the new hard drive. The original adhesive on the back of the thermal sensor should hold the sensor in place. Reuse the black tape from the old drive to secure the thermal sensor wire to the new drive. Your newly-installed drive should look very similar to the third picture.
  • Secure the thermal sensor to the new hard drive. The original adhesive on the back of the thermal sensor should hold the sensor in place.

  • Reuse the black tape from the old drive to secure the thermal sensor wire to the new drive.

  • Your newly-installed drive should look very similar to the third picture.

Hier Übersetzung einfügen

Hier Übersetzung einfügen

Hier Übersetzung einfügen

Deine Beiträge sind lizenziert unter der Open-Source Creative Commons Lizenz.