Zum Hauptinhalt wechseln

Hinweis: Du bearbeitest eine grundständige Anleitung. Alle Änderungen, die du vornimmst, betreffen alle 14 Anleitungen, die diese beinhalten.

Englisch
Chinesisch
2. Schritt
Carefully lay the iMac stand-side down on a flat surface. Due to tight tolerances, you will have to use a thin hooked tool to lift the display out of the outer case. As seen in the first picture, we made one out of a bent paperclip. A pair of angled tweezers can also work well. Use a thin hooked tool to lift one side of the top edge of the display by its steel outer frame.
  • Carefully lay the iMac stand-side down on a flat surface.

  • Due to tight tolerances, you will have to use a thin hooked tool to lift the display out of the outer case. As seen in the first picture, we made one out of a bent paperclip. A pair of angled tweezers can also work well.

  • Use a thin hooked tool to lift one side of the top edge of the display by its steel outer frame.

  • After lifting the top edge of the display on one side, hold it out of the outer case while you use a hooked tool to lift the other side.

  • Raise and hold the display high enough to access the cables.

  • Do not lift the top edge of the display out of the outer case too far, as several short ribbon cables still connect the two components.

仔细地把iMac背面朝下放在平坦的表面。

由于严格的公差[2],您将不得不使用一个细小的带钩的工具把屏幕从外壳中抬起。就像您在第一张照片里所看到的,我们用一个弯曲的曲别针制作了一个小工具,以下称其为小曲。

或者,使用我们的双硬盘套件,里面包括一对非常适合这项任务的有尖的镊子。

[2]: 译者注:英文原文为Tight tolerances,猜测应该为“紧凑的边缘”之意。

使用刚刚制作的小曲,把屏幕的顶部边缘的一边从金属外壳中翘起。

翘起屏幕之后,抓住它,同时用小曲翘起其它边缘。

抓住并向上抬起屏幕到一个足够操作里面线缆的高度。

不要将屏幕的上边缘从外壳上抬起过多,因为几个短带状电缆仍然连接着两个部件。

[* black] Carefully lay the iMac stand-side down on a flat surface.
[* icon_note] Due to tight tolerances, you will have to use a thin hooked tool to lift the display out of the outer case. As seen in the first picture, we made one out of a bent paperclip.
[* icon_note] Alternatively, our [product|IF174-002|Dual Hard Drive Kit] includes a
A pair of tweezers with an angled tip that are great for this tasktweezers can also work well.
[* icon_note] Due to tight tolerances, you will have to use a thin hooked tool to lift the display out of the outer case. As seen in the first picture, we made one out of a bent paperclip.
[* icon_note] Alternatively, our [product|IF174-002|Dual Hard Drive Kit] includes a
A pair of tweezers with an angled tip that are great for this tasktweezers can also work well.
[* black] Use a thin hooked tool to lift one side of the top edge of the display by its steel outer frame.
[* icon_note] After lifting the top edge of the display on one side, hold it out of the outer case while you use a hooked tool to lift the other side.
[* black] Raise and hold the display high enough to access the cables.
[* icon_caution] Do not lift the top edge of the display out of the outer case too far, as several short ribbon cables still connect the two components.

Deine Beiträge sind lizenziert unter der Open-Source Creative Commons Lizenz.