Zum Hauptinhalt wechseln
Niederländisch
Englisch
5. Schritt
Loosen the two soldering connections between the metal connectivity ends of the switch and the printboard by heating it with a soldering iron from the soldering station (2), at a temperature of around 380 degrees Celsius. Use a desoldering pump (4) to suck the soldering tin away. Gently pull the switch away till it disconnects. Take a look at this guide: Wie man Lötverbindungen herstellt und entlötet
  • Loosen the two soldering connections between the metal connectivity ends of the switch and the printboard by heating it with a soldering iron from the soldering station (2), at a temperature of around 380 degrees Celsius. Use a desoldering pump (4) to suck the soldering tin away. Gently pull the switch away till it disconnects.

  • Take a look at this guide: Wie man Lötverbindungen herstellt und entlötet

  • Watch out: the soldering iron is hot and may melt other parts in the product if you aren't careful.

Loosen the two soldering connections between the metal connectivity ends of the switch and the printboard by heating it with a soldering iron from the soldering station (2), at a temperature of around 380 degrees Celsius. Use a desoldering pump (4) to suck the soldering tin away. Gently pull the switch away till it disconnects.

Watch out: the soldering iron is hot and may melt other parts in the product if you aren't careful.

Deine Beiträge sind lizenziert unter der Open-Source Creative Commons Lizenz.