Englisch
Deutsch
3. Schritt
Use a spudger to disconnect ribbon cable(s) 1, 2, and 3. Just a reminder. The 3rd cable is actually connected to the board by a port, which requires an inset connector. Lift up the black tab on the back of the inset connector port, and then the 3rd ribbon should slide right out.
  • Use a spudger to disconnect ribbon cable(s) 1, 2, and 3.

  • Just a reminder. The 3rd cable is actually connected to the board by a port, which requires an inset connector.

  • Lift up the black tab on the back of the inset connector port, and then the 3rd ribbon should slide right out.

Hier Übersetzung einfügen

Hier Übersetzung einfügen

Hier Übersetzung einfügen

Deine Beiträge sind lizenziert unter der Open-Source Creative Commons Lizenz.