Zum Hauptinhalt wechseln
Englisch
Deutsch
19. Schritt
Desolder all 12 of the motor wires that connect to the drones mother boards. DO NOT cut the cables with wire cutters—they are enameled wire and are a pain  in the butt to solder back together and have them still work.  Do yourself a favor and just desolder them from the board. For reassembly,  note the order of the cables.  While the drone is upside down, black is the top wire, grey is middle, and white is bottom.
  • Desolder all 12 of the motor wires that connect to the drones mother boards.

  • DO NOT cut the cables with wire cutters—they are enameled wire and are a pain in the butt to solder back together and have them still work. Do yourself a favor and just desolder them from the board.

  • For reassembly, note the order of the cables. While the drone is upside down, black is the top wire, grey is middle, and white is bottom.

Hier Übersetzung einfügen

Hier Übersetzung einfügen

Hier Übersetzung einfügen

Deine Beiträge sind lizenziert unter der Open-Source Creative Commons Lizenz.