Zum Hauptinhalt wechseln
Englisch
Deutsch
Step 12
Back the adjustment limiter "stop-screw" out HALF WAY. Leaving it partly in insures we don't lose track of what hole it belongs in! The stop-screw should be out just enough that you can rotate the grind adjuster freely past the stops. Rotate the grind adjuster clockwise (second pic) until the upper burr holder cylinder backs all the way out.
Remove upper burr holder
  • Back the adjustment limiter "stop-screw" out HALF WAY. Leaving it partly in insures we don't lose track of what hole it belongs in!

  • The stop-screw should be out just enough that you can rotate the grind adjuster freely past the stops.

  • Rotate the grind adjuster clockwise (second pic) until the upper burr holder cylinder backs all the way out.

  • Remove the upper burr holder, noting the slot orientation for later.

Hier Übersetzung einfügen

Hier Übersetzung einfügen

Hier Übersetzung einfügen

Hier Übersetzung einfügen

Deine Beiträge sind lizenziert unter der Open-Source Creative Commons Lizenz.