Zum Hauptinhalt wechseln

Hinweis: Du bearbeitest eine grundständige Anleitung. Alle Änderungen, die du vornimmst, betreffen auch die Anleitung, die diese beinhaltet.

Englisch
Italienisch

Schritt 6 übersetzen

Schritt 6
Remove the battery from the iPhone.
  • Remove the battery from the iPhone.

  • If your replacement battery came in a plastic sleeve, slide off and remove the sleeve before installation.

  • If there's any alcohol solution remaining in the phone, carefully wipe it off or allow it to air dry before installing your new battery.

  • Before you adhere the replacement battery, temporarily reconnect the battery connector to the logic board socket. This ensures that the battery is properly aligned in its recess.

  • Adhere the battery, disconnect it, and continue reassembling your device.

  • If your new battery doesn’t have adhesive preinstalled, refer to this guide to replace the adhesive strips.

  • Perform a force restart after reassembly. This can prevent several issues and simplify troubleshooting.

Rimuovi la batteria dall'iPhone.

Se la tua batteria sostitutiva è fornita in un astuccio di plastica, rimuovilo prima dell'installazione tirandolo dalla parte opposta del cavo a nastro.

Quando installi la batteria, fai riferimento a questa guida per sostituire le strisce adesive della batteria.

Effettua un riavvio forzato dopo il rimontaggio. Questa operazione può evitare diversi inconvenienti e semplificare la risoluzione dei problemi.

[* black] Remove the battery from the iPhone.
[* icon_reminder] If your replacement battery came in a plastic sleeve, slide off and remove the sleeve before installation.
-[* black] When installing the battery, refer to [guide|103936|this guide|new_window=true] to replace your battery's adhesive strips.
+[* icon_reminder] If there's any alcohol solution remaining in the phone, carefully wipe it off or allow it to air dry before installing your new battery.
+[* icon_reminder] Before you adhere the replacement battery, temporarily reconnect the battery connector to the logic board socket. This ensures that the battery is properly aligned in its recess.
+ [* black] Adhere the battery, disconnect it, and continue reassembling your device.
+[* black] If your new battery doesn’t have adhesive preinstalled, refer to [guide|103936|this guide|new_window=true] to replace the adhesive strips.
[* black] Perform a [guide|97575|force restart|new_window=true] after reassembly. This can prevent several issues and simplify troubleshooting.

Deine Beiträge sind lizenziert unter der Open-Source Creative Commons Lizenz.