Zum Hauptinhalt wechseln

Hinweis: Du bearbeitest eine grundständige Anleitung. Alle Änderungen, die du vornimmst, betreffen alle 4 Anleitungen, die diese beinhalten.

Englisch
Spanisch
Schritt 6
Carefully lift the antenna cable and de-route it from the edge of the phone. Use the point of a spudger to help lift the cable free it from the retaining clips. If the cable does not have enough room to lift up, loosen this Phillips screw securing the logic board so that the board can give more wiggle room. Be sure to re-tighten this screw during re-installation.
  • Carefully lift the antenna cable and de-route it from the edge of the phone. Use the point of a spudger to help lift the cable free it from the retaining clips.

  • If the cable does not have enough room to lift up, loosen this Phillips screw securing the logic board so that the board can give more wiggle room.

  • Be sure to re-tighten this screw during re-installation.

  • During re-installation, be sure to route the antenna cable underneath the logic board corner.

  • During re-installation, you can also re-insert the SIM card tray after re-routing the antenna cable.

  • If you feel any resistance, stop and make sure that the tray isn't snagging the antenna cable.

Con cuidado levanta el cable de antena y desvíalo del borde del teléfono. Usa la punta de un spudger para ayudar a levantar el cable de los clips de retención.

Si el cable no tiene suficiente lugar para poder levantarse, suelta este tornillo Phillips que sujeta la placa lógica para que la placa pueda tener más lugar para moverse.

Asegúrate de volver a ajustar este tornillo durante la reinstalación.

Durante la reinstalación, asegúrate de colocar el cable de antena por debajo de la esquina de la placa lógica.

[* black] Carefully lift the antenna cable and de-route it from the edge of the phone. Use the point of a spudger to help lift the cable free it from the retaining clips.
[* icon_note] If the cable does not have enough room to lift up, loosen [https://d3nevzfk7ii3be.cloudfront.net/igi/3veVYIPkSTMUcSxx|this Phillips screw|new_window=true] securing the logic board so that the board can give more wiggle room.
[* icon_reminder] Be sure to re-tighten this screw during re-installation.
[* icon_reminder] During re-installation, be sure to route the antenna cable [https://d3nevzfk7ii3be.cloudfront.net/igi/3lvDvX6SFcvlAXuH|underneath the logic board corner|new_window=true].
[* icon_reminder] During re-installation, you can also re-insert the SIM card tray after re-routing the antenna cable.
[* icon_caution] If you feel any resistance, '''stop''' and make sure that the tray isn't snagging the antenna cable.

Deine Beiträge sind lizenziert unter der Open-Source Creative Commons Lizenz.