Zum Hauptinhalt wechseln

Hinweis: Du bearbeitest eine grundständige Anleitung. Alle Änderungen, die du vornimmst, betreffen alle 10 Anleitungen, die diese beinhalten.

Englisch
Französisch

Schritt 14 übersetzen

Schritt 14
Follow this guide to reinstall the back cover and replace the adhesive.
  • Follow this guide to reinstall the back cover and replace the adhesive.

  • Be sure to turn on your phone and test your repair before installing new adhesive and resealing the phone.

  • If desired, you may reinstall the back cover without replacing the adhesive. Remove any large chunks of adhesive that might prevent the back cover from sitting down flush. After installation, heat the back cover and apply pressure to secure it. It won't be waterproof, but the leftover adhesive is usually more than strong enough to hold.

Consultez ce tutoriel pour remonter la coque arrière et poser une nouvelle couche d'adhésif.

N'oubliez pas d'allumer votre téléphone et de tester votre réparation avant de poser le nouvel adhésif et de sceller à nouveau le téléphone.

Si vous le souhaitez, vous pouvez remonter la coque arrière sans remplacer l'adhésif. Retirez les plus gros résidus d'adhésif qui pourraient empêcher la coque arrière de tenir. Puis faites chauffer la coque arrière et appuyez dessus pour qu'elle adhère bien. Ce ne sera pas étanche, mais la colle suffit pour maintenir la coque en place.

[* icon_reminder] [guide|124003|Follow this guide|new_window=true] to reinstall the back cover and replace the adhesive.
[* icon_note] Be sure to turn on your phone and test your repair before installing new adhesive and resealing the phone.
-[* icon_note] If desired, you may reinstall the back cover without replacing the adhesive. Remove any large chunks of adhesive that might prevent the back cover from sitting down flush. After installation, heat the back cover and apply pressure to secure it. It won't be waterproof, but the glue is usually more than strong enough to hold.
+[* icon_note] If desired, you may reinstall the back cover without replacing the adhesive. Remove any large chunks of adhesive that might prevent the back cover from sitting down flush. After installation, heat the back cover and apply pressure to secure it. ***It won't be waterproof***, but the leftover adhesive is usually more than strong enough to hold.

Deine Beiträge sind lizenziert unter der Open-Source Creative Commons Lizenz.