Zum Hauptinhalt wechseln
Englisch
Spanisch
Schritt 4
Clean all traces of adhesive (and broken glass, if any) thoroughly from the case before re-sealing your watch. Scour the case using a cleaning pad, or use the tip of an opening tool or spudger wrapped in a lint-free cloth or coffee filter, along with a little isopropyl alcohol (90% concentration or greater). In a pinch, a Q-tip may also work.
  • Clean all traces of adhesive (and broken glass, if any) thoroughly from the case before re-sealing your watch.

  • Scour the case using a cleaning pad, or use the tip of an opening tool or spudger wrapped in a lint-free cloth or coffee filter, along with a little isopropyl alcohol (90% concentration or greater). In a pinch, a Q-tip may also work.

  • To remove the adhesive near the display cables, fold the display back down over the watch and carefully tilt it away from the frame so there's room to work.

  • Don't rush this step. Even a small amount of residue can prevent your display from bonding to the case, causing it to come loose over time.

Aplica un poco de alcohol isopropílico (>90%) a un bastoncillo de algodón o utiliza una almohadilla de limpieza para eliminar suavemente cualquier resto de adhesivo de la caja.

Para quitar el adhesivo del lado en el que se encuentran los cables de la pantalla, pliega la pantalla hacia abajo y tira de ella con cuidado para separarla del marco, de modo que haya suficiente espacio.

-[* black] Apply a little bit of isopropyl alcohol (>90%) to a Q-tip or use a [product|IF145-308|cleaning pad|new_window=true] to gently remove any remaining adhesive from the case.
- [* icon_note] To remove the adhesive on the side where the display cables are running, fold down the display and carefully pull it away from the frame so there's enough space.
+[* black] Clean all traces of adhesive (and broken glass, if any) thoroughly from the case before re-sealing your watch.
+ [* black] Scour the case using a [product|IF145-308|cleaning pad|new_window=true], or use the tip of an opening tool or spudger wrapped in a lint-free cloth or coffee filter, along with a little isopropyl alcohol (90% concentration or greater). In a pinch, a Q-tip may also work.
+ [* icon_note] To remove the adhesive near the display cables, fold the display back down over the watch and carefully tilt it away from the frame so there's room to work.
+[* icon_caution] Don't rush this step. Even a small amount of residue can prevent your display from bonding to the case, causing it to come loose over time.

Deine Beiträge sind lizenziert unter der Open-Source Creative Commons Lizenz.