Zum Hauptinhalt wechseln
Englisch
Chinesisch
Schritt 4
Clean all traces of adhesive (and broken glass, if any) thoroughly from the case before re-sealing your watch. Scour the case using a cleaning pad, or use the tip of an opening tool or spudger wrapped in a lint-free cloth or coffee filter, along with a little isopropyl alcohol (90% concentration or greater). In a pinch, a Q-tip may also work.
  • Clean all traces of adhesive (and broken glass, if any) thoroughly from the case before re-sealing your watch.

  • Scour the case using a cleaning pad, or use the tip of an opening tool or spudger wrapped in a lint-free cloth or coffee filter, along with a little isopropyl alcohol (90% concentration or greater). In a pinch, a Q-tip may also work.

  • To remove the adhesive near the display cables, fold the display back down over the watch and carefully tilt it away from the frame so there's room to work.

  • Don't rush this step. Even a small amount of residue can prevent your display from bonding to the case, causing it to come loose over time.

在棉签上涂抹一点异丙醇(> 90%酒精)或使用清洁垫轻轻去除Force Touch垫圈上残留的任何粘合剂。

要取下显示屏电缆下方的粘合剂,请将显示屏几乎关闭,并在清洁时轻轻将其拉离边缘。

-[* black] Apply a little bit of isopropyl alcohol (>90%) to a Q-tip or use a [product|IF145-308|cleaning pad|new_window=true] to gently remove any remaining adhesive from the case.
- [* icon_note] To remove the adhesive on the side where the display cables are running, fold down the display and carefully pull it away from the frame so there's enough space.
+[* black] Clean all traces of adhesive (and broken glass, if any) thoroughly from the case before re-sealing your watch.
+ [* black] Scour the case using a [product|IF145-308|cleaning pad|new_window=true], or use the tip of an opening tool or spudger wrapped in a lint-free cloth or coffee filter, along with a little isopropyl alcohol (90% concentration or greater). In a pinch, a Q-tip may also work.
+ [* icon_note] To remove the adhesive near the display cables, fold the display back down over the watch and carefully tilt it away from the frame so there's room to work.
+[* icon_caution] Don't rush this step. Even a small amount of residue can prevent your display from bonding to the case, causing it to come loose over time.

Deine Beiträge sind lizenziert unter der Open-Source Creative Commons Lizenz.