Zum Hauptinhalt wechseln
Englisch
Spanisch
Schritt 9
Use a pair of tweezers to place the metal plate covering the battery connector back in its original position. Install the Y000 tri-point screw.
  • Use a pair of tweezers to place the metal plate covering the battery connector back in its original position.

  • Install the Y000 tri-point screw.

  • At this point, it's a good idea to power on your watch and test all its functions before sealing the display in place.

Utiliza un par de pinzas para colocar la placa de metal que cubre el conector de la batería en su posición original.

Instala el tornillo Tri-point #000.

En este punto, es posible que desees encender el reloj y comprobar si todo está funcionando, antes de sellarlo.

[* black] Use a pair of tweezers to place the metal plate covering the battery connector back in its original position.
-[* red] Install the Tri-point #000 screw.
-[* icon_reminder] At this point you might want to turn on the watch and check if everything is working, before sealing it shut.
+[* red] Install the Y000 tri-point screw.
+[* icon_reminder] At this point, it's a good idea to power on your watch and test all its functions before sealing the display in place.

Deine Beiträge sind lizenziert unter der Open-Source Creative Commons Lizenz.