Zum Hauptinhalt wechseln
Englisch
Spanisch

Schritt 11 übersetzen

Schritt 11
Align the screen and press it down firmly onto the adhesive. For best results, apply heat from your iOpener, heat gun, or hair dryer to help set the adhesive. Then, apply some pressure for a few hours—wrapping the watch with a couple rubber bands, or placing it under a heavy book or two.
  • Align the screen and press it down firmly onto the adhesive.

  • For best results, apply heat from your iOpener, heat gun, or hair dryer to help set the adhesive.

  • Then, apply some pressure for a few hours—wrapping the watch with a couple rubber bands, or placing it under a heavy book or two.

  • As a final check, power on your watch and make sure Force Touch works correctly—a hard press on the screen should cause the watch to vibrate, and the press should register on the display.

Alinea la pantalla y presiónala firmemente sobre el adhesivo.

Para mejorar la adhesión del adhesivo, puedes utilizar un iOpener para calentar la pantalla. Luego aplica un poco de presión durante unas horas (ponerlo debajo de uno o dos libros pesados durante la noche podría ser una forma de hacerlo).

[* black] Align the screen and press it down firmly onto the adhesive.
- [* icon_reminder] To improve bonding of the adhesive you can use an iOpener to warm up the display. Then apply some pressure for a few hours (placing it under one or two heavy books overnight might be a way).
+[* black] For best results, apply heat from your iOpener, heat gun, or hair dryer to help set the adhesive.
+[* black] Then, apply some pressure for a few hours—wrapping the watch with a couple rubber bands, or placing it under a heavy book or two.
+[* black] As a final check, power on your watch and make sure Force Touch works correctly—a hard press on the screen should cause the watch to vibrate, and the press should register on the display.

Deine Beiträge sind lizenziert unter der Open-Source Creative Commons Lizenz.