Zum Hauptinhalt wechseln
Französisch
Englisch

Synology DS1019+ - a complete disassembly in rules

Informationen zur Anleitung

= Fertig = Unvollständig

      Beschreibe das genaue Ersatzteil oder den Bestandteil des device an dem du arbeitest. Bsp. Akku

      Einen Titel erstellen.

      Diese kurze Zusammenfassung wird nur in den Suchergebnissen angezeigt.

      Gebe Hintergrundinformationen, bevor der Leser mit der Anleitung beginnt.

      Anleitungsschritte

      1. Schritt — Presentation: the different faces of the case

      Here are the different interesting faces of the case: front (bay disks), rear (connectors and fans), below (2 hatches SSD).

      2. Schritt — Unlock the disk media

      Before teardown, unlock the disk media with the key.

      3. Schritt — Removes disks from the bay

      Since the media are unlocked, remove each disk media.

      4. Schritt — Backplane and memory slot access

      This is a significant innovation, the memory is now directly accessible and without disassembly of the housing, for the original bar as for the extension port.

      5. Schritt — Housing: hood removal 1/2

      Remove the 2 screws on the back of the case at the top and bottom (not the one above the USB port)

      6. Schritt — Housing: hood removal 2/2

      Slide the cover forward, then slide it out (here, to the left).

      7. Schritt — Internal parts: presentation

      in red: SSD M.2 expansion card 2280

      8. Schritt — USB 3 port removal

      Insérez ici votre traduction

      9. Schritt — Removing fan clips

      Remove the screws from the two shims to secure the disc cage and the two fans.

      10. Schritt — Remove motherboard from the hood 1/2

      4 Phillips screws must be removed from two side.

      11. Schritt — Remove motherboard from the hood 2/2

      Here, the motherboard is still secure to the disk cage.

      12. Schritt — Unsecure the motherboard from the metal cover

      Once the motherboard is out, unscrew the 4 screws of the metal protective cover (metal plate).

      13. Schritt — Motherboard: processor side

      Motherboard processor side

      14. Schritt — Motherboard: memory side

      Memory side of the motherboard (pre-equipped with 8 GB of RAM)

      Deine Beiträge sind lizenziert unter der Open-Source Creative Commons Lizenz.