Schritt 2 übersetzen
Schritt 2
Diagnosis
-
Take apart the phone and remove the display assembly. We can see that the dot projector has been water damaged and the crystal on the dot projector is broken.
-
Pull the battery adhesive strips out. Take out the front camera assembly.
-
Connect the dot projector flex cable with the repair programmer. Click ‘Check’. Results: Fusing.
-
Judging by this, the dot projector flex cable has been damaged. We need to burn data of the original dot projector flex cable onto a new dot projector flex cable and then replace the broken crystal with a good one.
Deine Beiträge sind lizenziert unter der Open-Source Creative Commons Lizenz.