Zum Hauptinhalt wechseln

Hinweis: Du bearbeitest eine grundständige Anleitung. Alle Änderungen, die du vornimmst, betreffen alle 8 Anleitungen, die diese beinhalten.

Englisch
Japanisch
Schritt 5
Pull up on the suction cup with firm, constant pressure to create a slight gap between the front panel and rear case. Insert an opening pick into the gap. The watertight adhesive holding the display in place is very strong; creating this initial gap takes a significant amount of force. If you're having a hard time opening a gap, apply more heat, and gently rock the display up and down to weaken the adhesive until you create enough of a gap to insert your tool.
Lift the display slightly
  • Pull up on the suction cup with firm, constant pressure to create a slight gap between the front panel and rear case.

  • Insert an opening pick into the gap.

  • The watertight adhesive holding the display in place is very strong; creating this initial gap takes a significant amount of force. If you're having a hard time opening a gap, apply more heat, and gently rock the display up and down to weaken the adhesive until you create enough of a gap to insert your tool.

吸盤カップをしっかりと引き上げます。リアケースとフロントパネルの間に僅かな隙間が生じるまで一定の力で引っ張ります。

隙間に開口ピックを差し込みます。

ディスプレイに留められた防水用接着剤は大変強力です。この隙間をまず作るにはかなりの力が必要です。隙間がうまく作れない場合は、さらに熱を当てて接着剤を柔らかくしてください。温まったらツールを差し込めるだけの隙間ができるまで、ゆっくりとスクリーンを上下に揺さぶります。

Deine Beiträge sind lizenziert unter der Open-Source Creative Commons Lizenz.