Zum Hauptinhalt wechseln

Hinweis: Du bearbeitest eine grundständige Anleitung. Alle Änderungen, die du vornimmst, betreffen alle 8 Anleitungen, die diese beinhalten.

Englisch
Italienisch
Schritt 6
Slide the opening pick around the lower left corner and up the left edge of the iPhone, slicing through the adhesive holding the display in place. Only insert the pick a few millimeters (about the width of the display bezel.) Otherwise, you may damage the display cables along this side of the iPhone. Only insert the pick a few millimeters (about the width of the display bezel.) Otherwise, you may damage the display cables along this side of the iPhone.
Separate the display adhesive
  • Slide the opening pick around the lower left corner and up the left edge of the iPhone, slicing through the adhesive holding the display in place.

  • Only insert the pick a few millimeters (about the width of the display bezel.) Otherwise, you may damage the display cables along this side of the iPhone.

Fai scorrere il plettro attorno all'angolo in basso a sinistra e quindi in alto lungo il bordo sinistro dell'iPhone, tagliando l'adesivo che tiene fermo lo schermo.

Infilare il plettro solo pochi millimetri (per circa lo spessore della cornice dello schermo), altrimenti potresti danneggiare i cavi dello schermo lungo questo bordo dell'iPhone.

Deine Beiträge sind lizenziert unter der Open-Source Creative Commons Lizenz.