Zum Hauptinhalt wechseln
Englisch
Chinesisch
Schritt 2
Once the screen is warm to touch, apply a suction cup to the bottom edge of the phone. If your rear glass is badly cracked, covering it with a layer of clear packing tape may allow the suction cup to adhere. Alternatively, very strong tape may be used instead of the suction cup. If all else fails, you can superglue the suction cup to the rear glass.
Insert an iFlex
  • Once the screen is warm to touch, apply a suction cup to the bottom edge of the phone.

  • If your rear glass is badly cracked, covering it with a layer of clear packing tape may allow the suction cup to adhere. Alternatively, very strong tape may be used instead of the suction cup. If all else fails, you can superglue the suction cup to the rear glass.

  • Lift the screen with the suction handle to create a small gap between the screen and the frame.

  • Insert the tip of an iFlex in the gap between the midframe and the screen.

一旦屏幕摸起来温暖,将吸盘吸在手机的底部边缘。

如果你的后玻璃裂得很厉害,用一层透明的包装胶带覆盖它可能会让吸盘粘住。或者,可以使用非常结实的胶带代替吸盘。如果所有其他方法都失败了,你可以将吸盘强力粘在后玻璃上。

用吸盘提起屏幕,在屏幕和框架之间形成一个小间隙。

将 iFlex 的尖端插入中框和屏幕之间的间隙。

Deine Beiträge sind lizenziert unter der Open-Source Creative Commons Lizenz.