Zum Hauptinhalt wechseln
Englisch
Französisch
Schritt 5
If the adhesive becomes hard to cut, it has most likely cooled down. Use your iOpener or heat gun to reheat it. Insert a third opening pick under the bottom left corner of the phone. Slide the opening pick up to the top left corner to cut the adhesive. Leave it in to prevent the adhesive from resealing.
Cut the lefthand-side adhesive
  • If the adhesive becomes hard to cut, it has most likely cooled down. Use your iOpener or heat gun to reheat it.

  • Insert a third opening pick under the bottom left corner of the phone.

  • Slide the opening pick up to the top left corner to cut the adhesive. Leave it in to prevent the adhesive from resealing.

Hier Übersetzung einfügen

Hier Übersetzung einfügen

Hier Übersetzung einfügen

Deine Beiträge sind lizenziert unter der Open-Source Creative Commons Lizenz.