Hinweis: Du bearbeitest gerade die grundständige Anleitung, die du eben angeschaut hast. Alle Änderungen, die du vornimmst, betreffen alle 21 Anleitungen, die diesen Schritt beinhalten.
Schritt 2 übersetzen
Place a suction cup next to the iPad's home button and press down to create a seal.
Firmly pull up on the suction cup to create a small gap between the front panel and the rear case.
Once you've opened a sufficient gap, insert an opening pick into the gap.
|[title] Create an opening gap|
|[* icon_note] If your iPad's screen is badly cracked, wear skin and eye protection. Cover the screen with a smooth layer of clear packing tape to contain glass shards and help the suction cup adhere. Alternatively, use a strong piece of tape (such as duct tape) and [https://d3nevzfk7ii3be.cloudfront.net/igi/NgVMfmOgJwEalMFF.huge|fold it into a handle|new_window=true].|
|[* black] Place a suction cup next to the iPad's home button and press down to create a seal.|
|[* icon_note] To get the most leverage, place the suction cup as close to the edge as possible without going past the edge of the display.|
|-||[* black] Firmly pull up on the suction cup|
|+||[* black] Firmly pull up on the suction cup to create a small gap between the front panel and the rear case.|
|[* icon_caution] Don't pull too hard, or you may shatter the glass. If necessary, apply more heat to further soften the adhesive.|
|[* black] Once you've opened a sufficient gap, insert an opening pick into the gap.|