Hinweis: Du bearbeitest gerade eine grundständige Anleitung, die Teil der Anleitung ist, die du eben angeschaut hast. Alle Änderungen, die du vornimmst, betreffen auch die Anleitung, die die grundständige Anleitung beinhaltet.
Schritt 1 übersetzen
Schritt 1
Pry up the midframe assembly
-
Insert the flat end of a spudger into the rectangular gap between the midframe assembly and back housing, nearest the left bumper.
-
Twist the spudger to partially release the midframe assembly.
-
Repeat this prying procedure on the gap near the right bumper to completely release the midframe assembly.
Deine Beiträge sind lizenziert unter der Open-Source Creative Commons Lizenz.