Zum Hauptinhalt wechseln

Repariere deine Sachen

Recht auf Reparatur

Store

Englisch
Deutsch
Schritt 12
Heres a before and after image.  Once again heat the lead, pull it in and then it will end up lodged into the plastic, making it stronger than it was before.  Once the heat has dissipated(10 secs), cut the excess leads off. You can now see the lead imbedded within the plastic.
  • Heres a before and after image. Once again heat the lead, pull it in and then it will end up lodged into the plastic, making it stronger than it was before. Once the heat has dissipated(10 secs), cut the excess leads off.

  • You can now see the lead imbedded within the plastic.

Hier Übersetzung einfügen

Hier Übersetzung einfügen

Deine Beiträge sind lizenziert unter der Open-Source Creative Commons Lizenz.