Zum Hauptinhalt wechseln

Repariere deine Sachen

Recht auf Reparatur

Store

Englisch
Deutsch
Schritt 3
Use a 5.5mm flathead screwdriver to anchor the backing bracket located on the inside of the binding. Using a Phillips #2 screwdriver, locate and unscrew the countersunk ovalhead M4 x 16mm screw holding the heel strap connector to the binding. Using a Phillips #2 screwdriver, locate and unscrew the countersunk ovalhead M4 x 16mm screw holding the heel strap connector to the binding.
  • Use a 5.5mm flathead screwdriver to anchor the backing bracket located on the inside of the binding.

  • Using a Phillips #2 screwdriver, locate and unscrew the countersunk ovalhead M4 x 16mm screw holding the heel strap connector to the binding.

Hier Übersetzung einfügen

Hier Übersetzung einfügen

Deine Beiträge sind lizenziert unter der Open-Source Creative Commons Lizenz.